top of page
header_c13

The 19" C13 PDUs socket strips are in aluminum and polypropylene housings, the end caps are screwed on or the strips can be reconnected. The strips are supplied with a connection cable and usually with a T12 or C14 plug.

Due to the construction, the power distribution unit can be attached vertically and horizontally in the 19" rack, on the rear wall or on the housing frame of the 19" network cabinet.

The C13 socket strips are supplied in the following variants:
 

  • 19" PDU 9 x C13, inserts black, border black, white and orange, with T12 connector

  • 19" PDU 9 x C13, inserts black, border black, white and orange, with C14 connector

  • 19" PDU 12 x C13, black inserts, black border, with T12 connector

  • 19" PDU 9 x C13, black inserts, black border, with T12 connector and ammeter

Technical specifications:

  • Rated voltage: 230 V AC, 50/60 Hz

  • Rated Current: 10A

  • Rated Power: P max = 2500W

  • Connecting cable: H05VV-F 3G 1.00 mm2, length: 3.0 m

  • Standards: IEC 60884-1

C13 / C14 - EN 60320-1

According to EN 60320-1, the device plug C14 and the device socket C13 are designed for a nominal current of 10 A at a voltage of 250V ~.

Steckdosenleisten

T12 / C14 connector

We supply C13 socket strips with a T12 or C14 connection plug. Alternatives are of course also possible, or the connection cable is assembled with an open end.

C13/C14
bottom of page