Smart PDUs Made to Measure
Custom-designed smart PDUs: The perfect solution for your rack
No two IT infrastructures are alike. That's why we don't offer off-the-shelf PDUs. We configure your Smart PDU precisely to your requirements – from power output and socket configuration to monitoring, sensors, cables, and color.
A custom-designed PDU doesn't necessarily have to cost more than a standard solution.
You determine the configuration
You determine the specifications – we configure the appropriate Smart PDU for your rack.
Sockets : IEX Combo (C13/C15/C19/C21) or T13/T23
Power rating : 16 A, 32 A or 63 A – single or three-phase
Functions : Monitoring, switching, sensors or RCM
Customizable : connector type, cable length, mounting hardware and RAL color
Which smart PDU do you need?
From simple current measurement to complete monitoring and control of individual outputs – choose the range of functions to suit your requirements.
Reliable power distribution without monitoring.
Local measurement of the input energy directly at the PDU.
Input measurement with security management and environmental monitoring.
Intelligent input monitoring with SNMP controller and remote access.
Input monitoring combined with switching of individual outputs.
Monitoring of the feed-in and measurement at the output level.
The complete solution: Monitoring and control down to the output level.
IEX Combo – maximum flexibility
The IEX Combo combines C13, C15, C19, and C21 connectors into a single socket. This allows C14, C16, C20, and C22 connectors to be used flexibly on the same PDU – even if the equipment configuration in the rack changes later.
-
One socket for different IEC plugs
-
Flexible device configuration without changing the PDU
-
Lockable plug connections
-
Compatible with standard, P-Lock and V-Lock power cables
Intelligent hot swap controller
The replaceable SNMP-IP controller enables centralized monitoring and control of your Smart PDU. If necessary, the controller can be replaced or upgraded during operation without interrupting the power supply to the connected devices.
-
OLED color display for measured values and alarms directly on the rack
-
2 × Gigabit Ethernet for network connectivity
-
2 × USB for additional functions and configuration
-
Sensor connection for environmental monitoring
-
PDU cascading for the central management of multiple PDUs
-
Power Share for redundant power supply to the controller
-
Reset function without switching off the power outlets
Reliability & Safety
Designed for reliable continuous operation in demanding data center environments.
±1% measurement accuracy
Precise energy and performance data.
Circuit breaker monitoring
Alarm triggered when circuit breaker trips.
Operation up to 60 °C
Reliable even at high ambient temperatures.
Secure communication
SNMPv3, HTTPS, SSH, RADIUS and other protocols.
Hydraulic-magnetic circuit breakers
Reliable protection regardless of ambient temperature.
RCM optional
Residual current monitoring for added operational safety.
Environmental monitoring directly in the rack
With optional sensors, you can monitor not only the power supply but also the environmental conditions directly within the rack. Critical changes can be detected early and appropriate alarms triggered.
Flexible mounting for any rack
Our Smart PDUs can be flexibly adapted to different rack systems and installation situations. Four different mounting options are available for this purpose.
Insert holder
Installation possible on 4 levels
Button holder
Tool-free installation, infinitely adjustable
Holder with button
Tool-free installation, infinitely adjustable
Screwed-on holder
Infinitely adjustable
FAQ Schneikel
- 01
- 02
- 03
- 04
- 05
- 06
- 07
- 08
- 09
- 10
- 11
- 12